Canon PowerShot ELPH 115 IS User Guide - Page 212

ç Contents ç Chapter Contents 212 • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 - 5 in "Adding a Computer" (=219). • All camera images can be viewed from the connected smartphone when you choose [Yes] in step 7. To keep camera images private, so that they cannot be viewed from the smartphone, choose [No] in step 7. • You can connect to smartphones that you have already connected to by choosing them on the [Select a Device] screen in step 3. • After you have accessed the Wi-Fi menu once, you can access it again by pressing the button. The recent target device is listed first, so you can easily connect again by pressing the buttons to choose it. To add a new device, display the device selection screen by pressing the buttons, and then configure the setting. If you prefer not to display recent target devices, press the button, and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off]. • The image quality level for movies that can be sent may differ depending on the smartphone. Refer to the instruction manual provided with your smartphone for details. • To add multiple smartphones, repeat the above procedures starting from step 1. • To change privacy settings for smartphones added to the list, choose the smartphone whose settings you want to change from [Edit a Device] in step 3, and then choose [View Settings].