Canon PowerShot S100 Software Starter Guide DC SD - Page 12
Precaution for Unplugging Cables, from the DIGITAL Terminal - 12 1
View all Canon PowerShot S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 1. Attach the supplied USB cable to a USB port directly on the computer and to the DIGITAL terminal on the camera as shown below. • There is no need to turn the camera or computer power off when attaching or detaching the USB cables. • Please consult your computer's manual for the location of the USB ports. USB Port USB Connector USB Connector DIGITAL Terminal 1. Open the DIGITAL terminal cover by slipping a fingernail under the top edge and pulling down. 2. Insert the connector so that the marks on the connector and camera align. 2. Install the USB driver the first time you connect via a USB port. (§ p. 13) Precaution for Unplugging Cables from the DIGITAL Terminal • Always press the [PUSH] button on the connector to detach the cable from the camera's DIGITAL terminal. PUSH Button