Canon PowerShot S100 Software Starter Guide DC SD - Page 60
press the [PUSH] button
View all Canon PowerShot S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
60 1. Attach the supplied USB cable to a USB port directly on the computer and to the DIGITAL terminal on the camera as shown below. • There is no need to turn the camera or computer power off when attaching or detaching the USB cables. • Please consult your computer's manual for the location of the USB ports. USB Port USB Connector USB Connector DIGITAL Terminal 1. Open the DIGITAL terminal cover by slipping a fingernail under the top edge and pulling down. 2. Insert the connector so that the marks on the connector and camera align. Precaution for Unplugging Cables from the DIGITAL Terminal • Always press the [PUSH] button on the connector to detach the cable from the camera's DIGITAL terminal. PUSH Button
60
1.
Attach the supplied USB cable to a USB port directly on the computer
and to the DIGITAL terminal on the camera as shown below.
•
There is no need to turn the camera or computer power off when attaching or
detaching the USB cables.
•
Please consult your computer’s manual for the location of the USB ports.
Precaution for Unplugging Cables
from the DIGITAL Terminal
• Always
press the [PUSH] button
on the
connector to detach the cable from the
camera’s DIGITAL terminal.
USB Port
DIGITAL Terminal
1. Open the DIGITAL terminal cover
by slipping a fingernail under the
top edge and pulling down.
USB Connector
USB Connector
2. Insert the connector so that the
4
marks on
the connector and camera align.
PUSH Button