Canon VB-M640VE Network Video Recording Software RM Series Administrator Manua - Page 12
Features, Direct camera operation
View all Canon VB-M640VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Features The RM-64/25/9 is a software product family used to monitor multiple locations using network cameras and to record and play back video from the cameras. It is possible to set up a monitoring system with a maximum of 512 cameras when using multiple Storage Servers. Operation when using the Viewer and RM Manager The Viewer is used to view video, and RM Manager is used for system management and to configure Storage Server settings. Multiple recording modes In addition to being able to record video for a specific period, you also have recording modes, such as sensor recording, motion detection recording, intelligent function recording and volume detection recording, which start recording when a particular type of camera event occurs. Support for JPEG/MPEG-4 and H.264 * The JPEG, MPEG-4 and H.264 video formats are supported for live view and recording. Using MPEG-4 or H.264 formats decreases the load on the network bandwidth, while maintaining high quality video and saving hard disk space when recording. Direct camera operation * You can change the camera angle and use the zoom while watching the live view. Two-way audio* Send and receive live audio and simultaneously record audio with the video. You can also use this feature to communicate with a location that has a camera. * Only available for cameras that support the feature. Flexible screen layout You can arrange multiple video windows in the Viewer, so you can compare video from different locations at the same time. The Viewer lets you create multiple layouts and organize them in tabs on the viewing area, so you can easily switch between different camera video. You can also operate up to two Viewer windows at the same time. With an environment that supports multiple displays, you can create a dual-display monitoring setup by locating a Viewer on each of the displays. Tags You can assign tags to a camera that give you information about the camera, such as its location and camera type. This is particularly useful when searching for cameras in a large-scale system. Dynamic layouts With this feature, you can automatically display videos in the Viewer on a layout from cameras that meet specific criteria, such as the camera status. User access management with user groups You can create user groups to more easily manage user access. By assigning permissions to a group, you automatically assign the same permissions to each member of the group. 12