Canon VB-M640VE Network Video Recording Software RM Series Administrator Manua - Page 74

Configure the Recording Mode  Continuous Recording Settings (1) (2) (3) (4) (5) (6) (1) [Default] Specify the resolution. If you select [Not Specified], the camera's resolution setting is used for recording. (2) [Video Format] Specify the video format ([JPEG], [MPEG-4] or [H.264], etc.). The available formats depend on the camera model. (3) [Maximum Frame Rate] Specify the maximum frame rate (number of frames recorded in one second) in the range from 0.1 to 30 frames per second (fps). (4) [Record audio if available] Select this check box if you want to record audio together with the video. (5) [Advanced] Displays the [Advanced Recording Settings] dialog box (p. 82). (6) [Use the recording-mode stream] Enable the recording stream function. With this function, the camera temporarily stores the video in its own memory before sending it to the Storage Server. This can help reduce the effects of non-uniform network traffic (jitter). Important • You can save JPEG video of the recorded stream to a memory card in the camera using [Use the recording mode stream] if the stream could not be distributed due to a network failure. Video is saved at a frame rate of 1 fps. For details, please refer to the camera manual. • The size of the recording data increases as the resolution and frame rate become higher. Make sure there is sufficient hard disk space available before specifying a higher resolution and frame rate. • If you select [MPEG-4] or [H.264], the [Storage Server] option in [Detect Motion Using] cannot be selected. • Even if the [Record audio if available] check box is selected, audio will not be recorded if the audio sending function has not been activated on the camera. If you schedule a recording, make sure the audio sending function on the camera has been set to [Enable]. 74