Canon VB-M640VE Network Video Recording Software RM Series Administrator Manua - Page 73

Note • You can specify the priority of the events generated by sensor recording, motion detection recording, Intelligent Function recording and volume detection recording. For details, please refer to (p. 75, p. 76, p. 79, p. 80). When two events occur simultaneously, the event with the higher priority takes precedence. • You can specify more than one recording mode at the same time. For example, you can select motion detection recording and specify a frame rate that is higher than continuous recording. This way, a high frame rate is used only when motion is detected. • The motion detection feature notifies you there is motion in an area when motion is not ordinarily expected. Do not use this feature for busy areas where motion detection may be triggered frequently. • When an event occurs, data is saved in the Storage Server as an operation record. As the number of operation records increases, operation during event detection and the search and Viewer response speeds may be affected. Use "Maximum events processed" (p. 15), described in "Operating Environment" > "For High-reliability/H.264 Video Format Systems," as a guide. • The volume detection recording and scream detection recording are not available on cameras on which a microphone cannot be connected. • The sensor recording function is not available on cameras on which a sensor cannot be connected. Only continuous recording can be used. 5 Setting a Recording Schedule Specify Advanced Settings Advanced settings are available when the [Advanced] button is displayed in the recording settings area. For details, please refer to "Configure the Advanced Recording Settings" (P. 82). Check the Recording Schedule When you click [OK] to close the [Edit Schedule Item] dialog box, the set recording schedule appears in the schedule area. The schedule becomes active as soon as it is displayed in the schedule area. Check the recording schedule in the schedule area. C50F C50i • The camera supports sensor recording and schedule recording to internal memory (picture recording function). If these features on the camera are enabled, they take precedence over the Storage Server recording schedule. You must disable the feature on the camera before using the recording schedule on the Storage Server. • If [Restrict Service Time] is enabled on the camera, recording will take place only during the service time, irrespective of the recording schedule. Important Be sure to test recording schedules before using them. 73