Canon VB-M640VE Network Video Recording Software RM Series Administrator Manua - Page 72

2 Select the check boxes for the days of the week on which to repeat the recording in [Repeat On]. If you click [Select All], you can select check boxes for all days. To clear all selections, click [Clear All]. Important To use one Storage Server with more than 32 cameras connected to it, set the start time of the recording schedule leaving 15minute intervals or longer so that the recording schedules of 33 or more cameras do not start at the same time. If recording schedules for 33 or more cameras start at the same time, recording may be delayed for some cameras. Note • You cannot specify overlapping recording schedules on the same camera. • The time of the recording schedules is based on the Storage Server clock. We recommend that you synchronize the clocks on all the Storage Server you are using. • If you set the operating system to automatically handle daylight saving time, the time will be automatically adjusted on the first and last days of the daylight saving time period. Specify the Recording Mode Specify the recording mode. Recording begins based on conditions met within the set day and time. 1 Select the check box next to the recording mode you want to use. For example, if you want continuously record for the entire duration of the recording schedule, select the check box next to [Continuous Recording]. 2 Configure the recording mode settings in the recording settings area. The settings are different for each recording mode. • Continuous recording (p. 74) Records continuously for the specified recording period. • Sensor recording (p. 75) Starts recording when there is a signal from a sensor connected to the camera. • Motion detection recording (p. 76) Starts recording when motion is detected. • Intelligent Function recording (p. 79) Starts recording when motion that meets the Intelligent Function detection criteria is detected. • Volume detection recording (p. 80) Starts recording when the volume detection criteria are met. • Scream detection recording (p. 80) Starts recording when a scream is detected. • Linked event recording (p. 81) Recording begins when a linked event occurs. R11 R10 M641 M640 M741 M740 S30 S31 S80x S90x H43 H41 H630 H610 H730 H710 M42 M40 M620 M600 M720 M700 Use Intelligent Function recording instead of motion detection recording. R10 M640 M740 S30 S31 S80x S90x H43 H41 H630 H610 H730 H710 M42 M40 M620 M600 M720 M700 Linked event recording is not supported. S30 S31 S80x S90x H43 H41 H630 H610 H730 H710 M42 M40 M620 M600 M720 M700 Scream detection recording is not supported. C500 C50F C50i C60 Intelligent Function recording is not supported. Use motion detection recording. C500 C60 C300 C50F C50i Volume detection recording is not supported. C300 Intelligent Function recording and motion detection recording using the camera are not supported. 72