Canon imageCLASS D1350 imageCLASS D1370/D1350/D1320 Basic Operation Guide - Page 88

Basic Procedures for Sending Faxes This section describes the basic procedure for sending faxes. 1 Place your document. "Placing Documents" (→P. 2-4) "Supported Document Types" (→P. 2-2) 2 Press [ ]. 4 Specify the destination. These are the following methods to specify a destination. (For details, see P.6-4 to 6-5.) Entering the fax number One-touch keys Coded dial codes Group dialing Address book - Sequential broadcast (→P.6-10) Using the Fax Functions 3 Specify the scanning settings as needed. There are the three items you can specify. (For details, see P.6-3.) Resolution Density 2-Sided Original Sharpness The settings specified here are effective only for the current sending operation. To make the settings effective for all the fax operations, see "Changing the Default Fax Settings" (→P. 6-21). 5 Press [ ] (Start). When your document is placed in the feeder The scan starts. Your document is sent to the destination when the scan is complete. When your document is placed on the platen glass Perform the following procedure. (1) Select the size of the original document using [ ] or [ ] and press [OK]. Scan Size LTR LGL STMT (2) Place the next page on the platen glass and press [ ] (Start). Press [ ] (Start) for each page. (3) When all documents are scanned completely, select using [ ] or [ ] and press [OK]. Your document is sent to your fax destination. 6-2