Canon imageCLASS D1350 imageCLASS D1370/D1350/D1320 Basic Operation Guide - Page 95

Using the Fax Functions Sending a Fax Abroad (Adding Pauses) When making an overseas call, you may need to add a pause to the fax number. Since signals are transmitted over long distances across a complicated channel, your call may not be connected without adding a pause after the country code or in front of the fax number. By adding a pause, enough time elapses before the machine starts dialing the number again. Keys to be used for this operation FAX Tone, Numeric keys 7 Press [ ] (Pause) to add a pause to the end of the fax/telephone number as needed. • The letter is displayed at the end of the fax number. • A pause added to the end of the number is set to 10 seconds. Fax Number 012p031XXXXXXXP 8 Press [ ] (Start). Pause Start 1 Place your document. "Placing Documents" (→P. 2-4) "Supported Document Types" (→P. 2-2) 2 Press [ ]. 3 Specify the scanning settings as needed. "Changing the Scan Settings (Fax)" (→P. 6-3) 4 Enter the international access code using the numeric keys. For more information on international access codes, contact your telephone company. Fax Number 012 5 Press [ ] (Pause) to enter a pause as needed. • The letter is displayed to indicate that a pause is added. • The default pause length is two seconds*. To change it, see "Pause Time" (→P. 6-23) • To add more pauses into the dialing sequence, press [ ] (Pause) again. * The default pause length varies depending on the country where you are using the machine. Fax Number 012P 6 Enter the country code, the area code, and the fax/telephone number using the numeric keys. Fax Number 012p031XXXXXXX 6-9