Canon imageCLASS MF5950dw imageCLASS MF5960dn/MF5950dw Basic Operation Guide - Page 122
To continuously scan the document, press, then press [OK].
View all Canon imageCLASS MF5950dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
5 Specify the scan settings based on your purpose of the scan. The following settings can be changed. For details on the setting procedure, see "Scanning" in the e-Manual. • Scan size • Color Mode • File Format • Density • Original orientation • Original Type • 2-Sided Original • Sharpness • Data Size The settings specified here are effective only for the current task. To apply these settings to all tasks, see "Scanning" in the e-Manual. 6 Press [ ] (Start). Scan Next: Press Start Scanning starts. When scanning from the feeder, or set the to After scanning the document, the scanned data is sent to the USB memory. When scanning from the platen glass, or set the to other than Proceed to Step 7 7 To continuously scan the document, press [ ] (Start). Scan Next: Press Start Folder and file names that can be saved Folder name File name The "SCAN_00" folder is created in the top level directory (root folder) in the USB memory device. Scanned document files are saved in this folder. When the "SCAN_00" folder reaches limit, the "SCAN_01" folder is automatically created. Folders up to "SCAN_99" are automatically created when the current working folder becomes full. File names between "SCAN0001.XXX" and "SCAN9999.XXX" are provided. ("XXX" is the extension for the file format.) The two-digit folder number is provided in the fifth and sixth characters from the left. A maximum of 100 files can be saved in a folder. When removing the USB memory device form the port (1) Press[ ] (Reset). (2) Press [ ] (Status Monitor/Cancel). (3) Select using [ ] or [ ] and press [OK]. Status Monitor/Cancel Device Status Copy/Print Job TX Job RX Job (4) Select using [ ] or [ ] and press [OK]. Device Status Paper Information Remove Memory Media Check Counter Secure Print Memory ... (5) Remove the USB memory device. (6) Press [ ] (Status Monitor/Cancel) after you have checked the details of the selected job to close the screen. To Cancel the scan (1) Select with [ ] or [ ], and then press [OK]. (2) Select with [ ] or [ ], and then press [OK]. 8 Select with [ ] or [ ], and then press [OK]. Scan Next: Press Start The scanned data is sent to the USB memory. Using the Scan Functions 7-6