Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 100
Generating Server Certificate Self-signed Certificate
View all Canon imagePROGRAF PRO-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Generating Server Certificate (Self-signed Certificate) When you use SSL connection via IPv6 network, you need to generate an IPv6 server certificate using the printer. Generate the server certificate from Remote UI. Follow the procedure below. Step1 Checking Printer's IP Address Step2 Generating Server Certificate Step3 Checking Generated Server Certificate Important • If you generate an IPv6 server certificate, you cannot use SSL communication via IPv4. In addition, a warning message may appear if you are using Remote UI. To reset the IPv6 server certificate, operate in the following order from the Remote UI. Security > SSL/TLS settings > Delete key and certificate > OK Checking Printer's IP Address 1. Check that printer is turned on. Power Supply 2. Display the HOME screen. If the HOME screen is not displayed, select the HOME button. 3. Use the buttons to select LCD and Operation Panel LAN settings and press the OK button. 4. Use the buttons to select the enabled LAN and press the OK button. Diagonal lines are displayed for disabled LAN icons. 5. Use the buttons to check the value on IPv6 link-local address. Write down the value on IPv6 link-local address for your reference when you open Remote UI and generate a server certificate. 100