Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 516
Updating Printer Firmware
View all Canon imagePROGRAF PRO-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 516 highlights
Updating Printer Firmware Important • Make sure the printer is connected to Internet before updating printer firmware. Updating Printer Firmware from Operation Panel Updating Printer Firmware from Remote UI Follow the procedure below. Updating Printer Firmware from Operation Panel 1. Check that printer is turned on and display HOME screen. If the HOME screen is not displayed, press the HOME button. 2. Select Various settings on HOME screen and press the OK button. The setup menu screen appears. 3. Select Printer settings and press the OK button. 4. Select Firmware update and press the OK button. 5. Select Install update and press the OK button. 6. Check displayed message and select Yes and press the OK button. 7. Check displayed message and select Start update and press the OK button. Update starts. Finishing update turns off the printer and it turns on again. 8. Check displayed message and press the OK button. Updating Printer Firmware from Remote UI 1. Display printer status on web browser. 2. Select Firmware update. 516