Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 352

6. Check Print Settings Set the number of copies to be printed and print options, as needed. 7. Tap Print The printer prints according to the specified settings. Note • It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network. • You cannot use AirPrint if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings. • Refer to "Cannot Print Using AirPrint" for printing problems when using AirPrint. Paper Size With AirPrint, the paper size is selected automatically according to the application being used on the iOS device and the region in which AirPrint is used. When you use the photo application, the default paper size is L size in Japan, and 4"x6" or KG in other countries and regions. When you use the document application, the default paper size is letter size in the U.S. region, and A4 in Japan and Europe. If the paper settings when printing differ from the paper information registered on the printer, the document will be printed using the paper settings configured on the printer. Important • Depending on the device or OS, the initial settings of paper size may differ from the above mentioned. Test printing is recommended. • Depending on the application you are using, the available paper size may differ. Checking Print Status You can check the print status of AirPrint from Print Center. Tap Print Center that is displayed in multitasking mode on your iOS device. 352