Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 227
No wiping
View all Canon imagePROGRAF PRO-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
2. Check message and select OK. 3. Remove any paper in top feed and press OK button. 4. Press ON button. 5. Make sure ON lamp is turned off and wipe paper feed roller with damp cloth. Wipe the paper feed roller (A) in the top feed with a moistened cloth or other materials. Do not touch the paper feed roller with your fingers, wipe it as rotating the shaft (B) with your fingers. Note • If the shaft is not rotated, turn off the printer and turn it on again. 6. After wiping with damp cloth, press ON button. 7. Perform paper feed roller cleaning (No wiping) again. Note • If printing data is sent to the printer when performing the paper feed roller cleaning with Wipe with cloth, the auto power on setting is disabled even if it is set to be automatically turned on. In this case, set the printer to be automatically turned on again. From the printer 227