Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 54
Enable/disable WSD
View all Canon imagePROGRAF PRO-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Important • If the LAN is disabled, the following items can not be selected. ◦ Set printer name Specifies the printer name. You can use 2 to 15 characters for the name. Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. ◦ TCP/IP settings Performs IPv4 or IPv6 setting. ◦ WSD settings Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows 8.1, and Windows 7). ◾ Enable/disable WSD Selects whether WSD is enabled or disabled. Note • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 10, Windows 8.1, and Windows 7. ◾ Optimize inbound WSD Selecting Enable allows you to receive the WSD printing data faster. ◾ Timeout settings Specifies the timeout length. ◦ Bonjour settings Setting items when you use Bonjour. ◾ Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. ◾ Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ IEEE802.1X settings Sets the IEEE802.1X authentication method, etc. ◦ LPR protocol settings Enables/Disables the LPR setting. ◦ RAW protocol 54