Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 441
Make sure printer is selected as connection for device e.g. smartphone or
View all Canon imagePROGRAF PRO-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
Check1 Check the power status of printer. Power Supply If the power is already turned on, cycle the power switch. Check2 Is the icon displayed on the LCD? If not, Wireless Direct is disabled. Turn on Wireless Direct. Check3 Check the settings of your device (smartphone/tablet). Make sure Wi-Fi is enabled on your device. For details, refer to your device's instruction manual. Check4 Make sure printer is selected as connection for device (e.g. smartphone or tablet). Select the network name (SSID) for Wireless Direct specified for the printer as the connection destination for devices. Check the destination on your device. For details, refer to your device's instruction manual or visit the manufacturer's website. To check the network name (SSID) for Wireless Direct specified for the printer, display it using the operation panel of the printer or print out the network setting information of the printer. • Display on the LCD. LAN settings • Print the network settings. Printing Network Settings Check5 Have you entered the proper password specified for the Wireless Direct? To check the password specified for the printer, display it using the operation panel of the printer or print out the network setting information of the printer. • Display on the LCD. LAN settings • Print the network settings. Printing Network Settings Check6 Make sure the printer is not placed too far away from the device. If the distance between the printer and device is too far, wireless communication becomes poor. Place the printer and device close to each other. Check7 Make sure 5 devices are already connected. Wireless Direct does not allow more than 5 devices to be connected. 441