Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 51
Advanced, Wireless Direct, Settings, Enable/disable Wireless Direct, Change SSID/device name
View all Canon imagePROGRAF PRO-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup. ◦ Advanced For details on each setting item: Advanced • Wireless Direct The following setting information on the Wireless Direct connection is displayed. (Some items are not displayed depending on printer settings.) Items Connection Network (SSID)/device name Password Communication mode Channel Wi-Fi security No. of printers connected now IPv4 address IPv4 subnet mask IPv4 default gateway IPv6 link-local address IPv6 link-local prefix length MAC address (Wi-Fi) IPsec settings Printer name Bonjour service name Setting Enable / Disable DIRECT-XXXX-PRO-300series XXXXXXXXXX (10 characters) Wireless Direct 3 WPA2-PSK (AES) XX / XX XXX. XXX. XXX. XXX (12 characters) XXX. XXX. XXX. XXX (12 characters) XXX. XXX. XXX. XXX (12 characters) XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters) XXX (up to 3 digits) XX:XX:XX:XX:XX:XX (12 characters) Enable (ESP) / Enable (ESP & AH) / Enable (AH) / Disable XXXXXXXXXXXXXXX (up to 15 characters) XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters) ("XX" represents alphanumeric characters.) To change the setting, select Settings. ◦ Enable/disable Wireless Direct Select Yes to wirelessly connect without wireless router. ◦ Change SSID/device name Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for Wireless Direct. 51