Canon imagePROGRAF PRO-300 PRO-300 series User Manual - Page 294

the left decreases the amount. It is recommended to set the slider at the second position from the right for most cases. Important • When the Borderless Extension slider is set to the rightmost position, the back side of the paper may become smudged. 4. Click Print When you perform print, the data is printed without any margins on the paper. Important • Borderless printing only supports specific paper sizes. Make sure to select a paper size with the wording "Borderless" from the Paper Size. • When borderless printing is enabled, Plain Paper and Hagaki A appear grayed out and are unavailable in Media Type list of Quality & Media of the pop-up menu in the Print dialog. • Depending on the type of paper, Borderless Printing may reduce the print quality at the top and bottom edges of the paper. Borderless Printing on thick paper may also smudge the front or back surface of the paper. • When the ratio of the height to the width differs from the image data, a portion of the image may not be printed depending on the size of the media used. In this case, crop the image data with an application software according to the paper size. • When scaled printing or page layout printing is enabled, you cannot perform borderless printing. Note • When you set Media Type to Matte Photo Paper, Premium Fine Art Smooth, Premium Fine Art Rough or Photo Paper Pro Premium Matte A from the Quality & Media pop-up menu of the print dialog, borderless full-page printing is not recommended. 294