Casio CTK7000 User Guide - Page 36
Press the R-14 YES button.
View all Casio CTK7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Applying Effects to a Sound 5. Use the R-17 (t, y) buttons to move the 0 to the parameter you want to change. • For information about the operation and the setting range of each parameter, see "DSP Parameter Settings" (page E-35). 6. Use the dial or R-14 (-, +) buttons to change the setting value. • Pressing the R-14 (-, +) buttons at the same time returns a parameter to its initial default setting. • Changing the DSP parameter while a note is being output from the Digital Keyboard may cause noise to be generated. This does not indicate malfunction. 7. Repeat steps 5 and 6 as required to configure other parameters. 8. Press the R-15 (EXIT) button. • This displays the confirmation screen shown below. 10. Use the dial or R-14 (-, +) buttons to select the destination user DSP number you want. 11. Use the R-17 (u, i) buttons to move the cursor to the name character position you want to change, and then use the dial or R-14 (-, +) buttons to select the character you want. • See "Supported Input Characters" (page E-160) for information about the characters you can input for the name. • To input a space, press both of the R-14 (-, +) buttons at the same time. 12. After everything is the way you want, press the R-16 (ENTER) button. • A message (Replace?) will appear on the display to confirm whether you want to replace the existing data with the new data. Press the R-14 (YES) button to replace the existing data with the new data. • The message "Please Wait" will remain on the display while a data save operation is in progress. Do not perform any other operation while it is displayed. Turning off the Digital Keyboard or removing the memory card can cause Digital Keyboard data to be deleted or become corrupted. It also can cause the Digital Keyboard to fail to turn on when the L-1 (POWER) button is pressed. If this happens, refer to "Troubleshooting" (page E-150). To cancel the editor operation without saving the edited results, press the R-14 (NO) button. 9. Press the R-14 (YES) button. • This displays a screen for specifying the destination user DSP number and DSP name. Destination user DSP number DSP name E-34