Casio CTK7000 User Guide - Page 54

Using Drawbar Organ Tones Editing Drawbar Organ Tones User Drawbar Organ Tone Numbers Tone areas numbered L:051 through L:100 are for storage of user drawbar organ tones. You can have up to 50 user drawbar organ tones stored in memory at one time. You can recall a user drawbar organ tone by pressing the R-12 ([L] DRAWBAR ORGAN) button and then using the dial or the R-14 (-, +) buttons to specify the tone number you want. After recalling a user drawbar organ tone, you can perform the same operations as those supported for preset drawbar organ tones. For more information, see "To select and play with a drawbar organ tone" (page E-50). To edit a drawbar organ tone and store it 1. Select the drawbar organ tone you want to edit. • Perform the procedure under "To select and play with a drawbar organ tone" (page E-50). • At this point, you can perform operations with sliders D-4 (16') through D-12 (1'), and the D-2 (PERCUSSION SECOND) and D-3 (PERCUSSION THIRD) buttons before starting the tone editing operation. For details about using the sliders and buttons, see "Adjusting a Drawbar Organ Tone in Real Time" (page E-51) and "To configure the level meter to show the harmonic overtone level of each slider position" (page E-51). 2. Press the C-8 (TONE EDITOR) button. • This displays the drawbar editor screen. 5. Repeat steps 3 and 4 as required to configure other parameters. 6. To store a rhythm after you edit it, hold down the R-13 (FUNCTION) button as you press the C-17 (MENU) button. • This displays the drawbar edit menu. 7. Press the R-16 (ENTER) button. • This displays a screen for specifying the destination user drawbar organ tone number and tone name. 8. Use the dial or the R-14 (-, +) buttons to select the destination user drawbar organ tone number you want. 9. Use the R-17 (u, i) buttons to move the cursor to the name character position you want to change, and then use the dial or R-14 (-, +) buttons to select the character you want. • For details about the characters you can input, see "Supported Input Characters" (page E-160). • To input a space, press both of the R-14 (-, +) buttons at the same time. 10. Press the R-16 (ENTER) button. • A message (Replace?) will appear asking if you want to overwrite the data currently in the destination with the new data. Press the R-14 (YES) button to overwrite. • The message "Please Wait" will remain on the display while a data save operation is in progress. Do not perform any other operation while it is displayed. Turning off the Digital Keyboard or removing the memory card can cause Digital Keyboard data to be deleted or become corrupted. It also can cause the Digital Keyboard to fail to turn on when the L-1 (POWER) button is pressed. If this happens, refer to "Troubleshooting" (page E-150). • You can use the R-17 (u, i) buttons to scroll between pages. 3. Use the R-17 (t, y) buttons to move the 0 to the parameter you want to change. • For information about the operation and the setting range of each parameter, see "Drawbar Organ Tone Parameter Settings" (page E-53). 4. Use the dial or the R-14 (-, +) buttons to change the setting value. • Pressing the R-14 (-, +) buttons at the same time returns a parameter to its initial default setting. E-52