Cisco 2950G 24 Software Configuration Guide - Page 613
an Image File By Using RCP on B-29, Download or Upload an Image File By Using RCP
UPC - 746320687711
View all Cisco 2950G 24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 613 highlights
Appendix B Working with the IOS File System, Configuration Files, and Software Images Working with Software Images Step 5 Step 6 Step 7 Command end archive download-sw /overwrite /reload rcp:[[[//[username@]location]/directory]/image-na me.tar] archive download-sw /leave-old-sw /reload rcp:[[[//[username@]location]/directory]/image-na me.tar] Purpose Return to privileged EXEC mode. Download the image file from the RCP server to the switch, and overwrite the current image. • The /overwrite option overwrites the software image in Flash with the downloaded image. • The /reload option reloads the system after downloading the image unless the configuration has been changed and not been saved. • For //username, specify the username. For the RCP copy request to execute successfully, an account must be defined on the network server for the remote username. For more information, see the "Preparing to Download or Upload an Image File By Using RCP" section on page B-29. • For @location, specify the IP address of the RCP server. • For /directory/image-name.tar, specify the directory (optional) and the image to download. Directory and image names are case sensitive. Download the image file from the RCP server to the switch, and keep the current image. • The /leave-old-sw option keeps the old software version after a download. • The /reload option reloads the system after downloading the image unless the configuration has been changed and not been saved. • For //username, specify the username. For the RCP copy request to execute, an account must be defined on the network server for the remote username. For more information, see the "Preparing to Download or Upload an Image File By Using RCP" section on page B-29. • For @location, specify the IP address of the RCP server. • For /directory]/image-name.tar, specify the directory (optional) and the image to download. Directory and image names are case sensitive. The download algorithm verifies that the image is appropriate for the switch model and that enough DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the download algorithm removes the existing image on the Flash device whether or not it is the same as the new one, downloads the new image, and then reloads the software. Note If the Flash device has sufficient space to hold two images and you want to overwrite one of these images with the same version, you must specify the /overwrite option. 78-14982-01 Catalyst 2950 Desktop Switch Software Configuration Guide B-31