Cisco 2950G 24 Software Configuration Guide - Page 73

Chapter 3 Getting Started with CMS Front Panel View Front-Panel Images You can manage the switch from a remote station by using the front-panel images. The front-panel images are updated based on the network polling interval that you set from CMS > Preferences. This section includes descriptions of the LED images. Similar descriptions of the switch LEDs are provided in the switch hardware installation guide. Note The Preferences window is not available if your switch access level is read-only. For more information about the read-only access mode, see the "Access Modes in CMS" section on page 3-31. Figure 3-7 shows the port icons as they appear in the Front Panel. To select a port, click the port on the Front Panel. The port is then highlighted with a yellow outline. To select multiple ports, you can: • Press the left mouse button, drag the pointer over the group of ports that you want to select, and then release the mouse button. • Press the Ctrl key, and click the ports that you want to select. • Right-click a port, and select Select All Ports from the port popup menu. Figure 3-7 Port Icons Table 3-2 describes the colors representing the wavelengths on the CWDM GBIC modules. For port status LED information, see the "Port Modes and LEDs" section on page 3-8. 78-14982-01 Catalyst 2950 Desktop Switch Software Configuration Guide 3-7