Cisco AIR-LAP1131AG-E-K9 Hardware Installation Guide - Page 4
Troubleshooting Autonomous Access Points - default ip
View all Cisco AIR-LAP1131AG-E-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Contents Warnings 2-2 Unpacking the Access Point 2-3 Package Contents 2-3 Basic Installation Guidelines 2-4 Controller Discovery Process for Lightweight Access Points 2-4 Deploying the Access Points on the Wireless Network 2-5 Access Point Layout and Connectors 2-6 Mounting Plate 2-7 Suspended Ceiling Adjustable T-Rail Clips 2-8 Opening the Access Point Cover 2-11 Mounting the Access Point on a Horizontal Surface 2-12 Mounting the Access Point Below a Suspended Ceiling 2-13 Mounting the Access Point Above a Suspended Ceiling 2-14 Mounting Access Point on a Network Cable Box 2-16 Mounting Access Point on a Desktop or Shelf 2-16 Attaching the Access Point to the Mounting Plate 2-16 Securing the Access Point 2-18 Using a Security Cable 2-18 Securing the Access Point to the Mounting Plate 2-19 Connecting the Ethernet and Power Cables 2-21 Connecting to an Ethernet Network with an Inline Power Source 2-22 Connecting to an Ethernet Network with Local Power 2-23 Rotating the Cisco Logo 2-24 3 C H A P T E R Troubleshooting Autonomous Access Points 3-1 Checking the Autonomous Access Point LEDs 3-2 Checking Basic Settings 3-4 Default IP Address Behavior 3-4 Default SSID and Radio Behavior 3-4 Enable Radio Interfaces 3-5 SSID 3-5 WEP Keys 3-5 Security Settings 3-5 Low Power Condition for Autonomous Access Points 3-6 Intelligent Power Management 3-6 Inline Power Status Messages 3-7 Configuring Power Using the CLI 3-10 Issuing the Cisco IOS Command Using the CLI 3-11 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide iv OL-8369-05