Clifford GP1000T Owners Guide - Page 12
auto-immobilisation, remote siren silencing - alarms
View all Clifford GP1000T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
7. Then once. This enters a 0 as there was not a previous digit entered with . 8. Then once. 9. Then once. This enters the final digit 1. 10. Then button once to disarm without a remote. auto-immobilisation Immobiliser circuits automatically activate after 30-seconds. Auto-immobilisation sequence: 1. Turn ignition off or disarm alarm. 2. After 30-seconds the systems Immobilisation circuits activate and engage the starter and engine interrupts. 3. LED flashes at ½ normal speed. Disarm the system when immobilised: Use one of the following methods to turn off auto-immobilisation. z Turn ignition on and press the mitter. button of the trans- z Arm the alarm and then disarm the alarm. z Turn the ignition on and enter the system Valet/PIN code. remote siren silencing Remote siren silencing is a feature that makes it possible to silence and reset the system when it is triggering without disarming the system. If the system is triggered and the siren is sounding, press on the © 2005 directed electronics, inc. all rights reserved 9