Clifford GP1000T Owners Guide - Page 25

manual programming instructions It is a good idea to document changes by taking note of all feature changes made in programming mode. To enter the User Selectable Features programming: 1. Ignition on - Turn the ignition to the on/run position or start the engine. 2. Enter PIN - Your PIN code is noted on the back of this guide. FOR EXAMPLE: To enter a PIN code of 4301- Press four times, then once. This enters the digit 4. then three times, then once. This enters the digit 3 and then once. This enters a 0 as there was not a previous digit entered with . then once, and then once. This enters the final digit 1. 3. Hold/Chirp/Release - After entering the PIN code, press and hold until a chirp is heard and the LED turns on, then release the button. You have now entered the feature selection position of the User Selectable Features grid. 4. Column select - Press and release the same number of times as the desired column. After a pause the siren will chirp the same number of times as the selected column for confirmation (e.g. 3-chirps means column 3 of the features is selected). 5. Feature select - Press and release the same number of times as the desired row. The siren will chirp with each press. The feature can now be changed using the remote control. 22