Clifford GP1000T Owners Guide - Page 34
PIN Code Confirmation Procedure
View all Clifford GP1000T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
PIN Code Confirmation Procedure Begin this procedure within 15 seconds of finishing the programming sequence or the new code will not be set. 1. Turn on the ignition. 2. Enter the new PIN code. 3. Press and hold for three seconds. z LED turns on: New PIN code is learned and programming is complete. z LED stays off: New PIN code is not learned and the system reverts to the old PIN code. Repeat the programming sequence. © 2005 directed electronics, inc. all rights reserved 31
31
© 2005 directed electronics, inc. all rights reserved
PIN Code Confirmation Procedure
Begin this procedure within 15 seconds of finishing the programming
sequence or the new code will not be set.
1.
Turn on the ignition.
2.
Enter the new PIN code.
3.
Press and hold
for three seconds.
LED turns on: New PIN code is learned and program-
ming is complete.
LED stays off: New PIN code is not learned and the sys-
tem reverts to the old PIN code. Repeat the program-
ming sequence.