Clifford GP1000T Owners Guide - Page 29

select siren sounds This feature allows you to select which siren sounds will be played back when the alarm is triggered (default is Tone 1). Use the following procedure to set this feature: 1. Enter the feature. 2. Press the button of the remote to begin the playing of siren sounds. 3. Siren will generate each sound for 5-seconds. There are 6 in total. 4. To add the sound press the while that sound is playing. button on the Valet switch 5. To delete the sound press the button on the Valet switch while that sound is playing. note: After selecting or deleting a sound the siren will immediately play the next sound. If no sounds are selected by pressing the or button the system will remain in its previous setting. remote valet on/off This feature allows you to set remote Valet on or off. reset to default This feature allows you to restore the programming to factory defaults, except for the PIN code and remote controls programmed into the system. user selectable features descriptions - column three The features in this column pertain to programming individual remote channels in custom configurations. Following is an explanation of the 26