Clifford GP1000T Owners Guide - Page 31

sensor disable z The remote button programmed for this feature will make the system bypass the sensors for one arming cycle only. On the next arming cycle, zones 1, 2, and 3 will be reinstated. clear all remotes z This feature will erase all remote codes from the system memory. This feature is convenient for erasing any remotes that have been lost, stolen, or incorrectly programmed into the system. z After entering this feature press the button on a remote that is programmed to the system; the siren will chirp twice to indicate that all remotes have been erased from memory. programming notes Note #1: Adding a new remote in auto-learn configuration z Press the button of the remote control; the siren will chirp once. z Immediately press again; the siren will chirp twice to confirm the new remote has been programmed. Note #2: Adding a new remote in custom-configuration z For the channel, transmit the channel of the new two, three, four, or five button remote that you want to con- trol that feature; the siren will then chirp once. z Immediately transmit the same channel again, the siren will chirp twice to confirm the remote channel has been programmed. 28