Clifford GP1000T Owners Guide - Page 16

To exit Valet Mode: 1. Turn the ignition On, the system will exit Valet® mode automatically. remote valet mode The operations described in this section refer to remote buttons. Remember, the buttons used in all the instructions in this guide correspond to the Standard Configuration for the 3-button remote. This may not be how your remote is set up. To enter Valet Mode, press and simultaneously. The LED status indicator will illuminate continuously if you are entering Valet Mode, or will turn off if you are exiting Valet Mode. instant auto-arming bypass This will bypass the auto arm feature once only. 1. With the key, turn the ignition on, then off within two seconds. 2. The siren will chirp once to confirm auto arming bypass. 3. The system will not auto arm. note: The system will revert to normal auto arming when the system sees the ignition on for at least three seconds and then turned off, or the system is armed and disarmed with the remote. During auto arming bypass the system will not auto-activate the accessory output when using the remote to arm the system. © 2005 directed electronics, inc. all rights reserved 13