Clifford GP1000T Owners Guide - Page 13

remote to stop the trigger and return the unit to the armed state. The system will not disarm, but rather reset. This prevents you from dis- abling the system should you wish to silence it without visually check- ing the vehicle. After resetting the system, press again to disarm the system. When you remote siren silence, the siren will either chirp 2 or 4 times. 2-chirps indicate that the system is still armed, but the trigger that caused the alarm is no longer active. 4-chirps indicate that the system is still armed, but the trigger that caused the alarm is still active. NOTE: If 4-chirps sound the input that caused the alarm trigger will be bypassed until the system is fully disarmed and armed again, or the alarm trigger is removed. remote chirp muting (3-button remote only) To temporarily turn off the arm or disarm chirps, use remote chirp mut- ing. Simply press on the remote (3-button remote only), and the confirmation chirp(s) will be eliminated for that one operation only. The indicator lights will flash to confirm the arm/disarm command. If you want the arm/disarm chirps turned off permanently, please refer to the User-Selectable Features section of this guide. 10