Clifford GP1000T Owners Guide - Page 22
high frequency, smart power up II, power saver mode
View all Clifford GP1000T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
high frequency Your system transmits and receives at 433 MHz. This provides a cleaner spectrum with less interference and a more stable signal. smart power up II This security system will store its current state to non-volatile memory. If power is lost and then reconnected the system will recall the stored state from memory. This means if the unit is in Valet Mode and the battery is disconnected for any reason, such as servicing the car, when the battery is reconnected the unit will still be in Valet Mode. This applies to all states of the system including arm, disarm, autoimmobilised and Valet Mode. power saver mode z When in Valet mode, the LED will turn off 1-hour after entering Valet mode. z After 24 hours in the armed state, the LED will decrease the flash rate to /1 2 the normal rate; after 48 hours it will decrease to /1 4 the normal rate. © 2005 directed electronics, inc. all rights reserved 19