Compaq 1592DMT Compaq Armada 1500 Family of Personal Computers Maintenance and - Page 103

Hard Drive

Page 103 highlights

7.9 Hard Drive NOTE: The 3-inch hard drive or the 2.5-inch hard drive with carrier are interchangeable. The hard drive is held in place with two screws and a retaining bracket. To remove the hard drive and bracket, complete the following steps: 1. Disconnect the AC power and any external devices (Section 7.4.1). 2. Remove the battery pack (Section 7.4.3). 3. Remove the DualBay device (Section 7.4.4). 4. Remove any PC Cards (Section 7.4.5). 5. Raise the keyboard (Section 7.7). 6. Remove two screws and the hard drive retaining bracket that secure the hard drive in place. Figure 7-15. Removing the Hard Drive Bracket Computer Removal and Replacement Procedures 7-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Computer Removal and Replacement Procedures
7-19
7.9
Hard Drive
NOTE:
The 3-inch hard drive or the 2.5-inch hard drive with carrier are
interchangeable.
The hard drive is held in place with two screws and a retaining bracket. To remove the
hard drive and bracket, complete the following steps:
1.
Disconnect the AC power and any external devices (Section 7.4.1).
2.
Remove the battery pack (Section 7.4.3).
3.
Remove the DualBay device (Section 7.4.4).
4.
Remove any PC Cards (Section 7.4.5).
5.
Raise the keyboard (Section 7.7).
6.
Remove two screws and the hard drive retaining bracket that secure the hard
drive in place.
Figure 7-15.
Removing the Hard Drive Bracket