Compaq 1592DMT Compaq Armada 1500 Family of Personal Computers Maintenance and - Page 111

Display Assembly

Get Compaq 1592DMT - Armada - Pentium MMX 233 MHz PDF manuals and user guides View all Compaq 1592DMT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 111 highlights

7.12.2 Display Assembly To remove the display assembly, complete the following procedures: 1. Disconnect the AC power and any external devices (Section 7.4.1). 2. Remove the battery pack (Section 7.4.3). 3. Remove the DualBay device (Section 7.4.4). 4. Remove any PC Cards (Section 7.4.5). 5. Remove the microphone/display cable cover (Section 7.11). 6. Remove the clutch covers (Section 7.12.1). 7. Remove two screws from each clutch and the clutch tension plate that secure the 1 display to the base enclosure . 2 8. Disconnect the display cables from the base enclosure . 9. Lift the display assembly from the base enclosure Figure 7-23. Removing the Display Assembly Reverse the procedure to replace the display assembly. CAUTION: To avoid damaging the display and ground cables, attach the ground cable before attaching the display cables when replacing the display assembly. Computer Removal and Replacement Procedures 7-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Computer Removal and Replacement Procedures
7-27
7.12.2
Display Assembly
To remove the display assembly, complete the following procedures:
1.
Disconnect the AC power and any external devices (Section 7.4.1).
2.
Remove the battery pack (Section 7.4.3).
3.
Remove the DualBay device (Section 7.4.4).
4.
Remove any PC Cards (Section 7.4.5).
5.
Remove the microphone/display cable cover (Section 7.11).
6.
Remove the clutch covers (Section 7.12.1).
7.
Remove two screws from each clutch and the clutch tension plate that secure the
display to the base enclosure
.
8.
Disconnect the display cables from the base enclosure
.
9.
Lift the display assembly from the base enclosure
Figure 7-23.
Removing the Display Assembly
Reverse the procedure to replace the display assembly.
CAUTION:
To avoid damaging the display and ground cables, attach the ground cable
before attaching the display cables when replacing the display assembly.