Compaq 1592DMT Compaq Armada 1500 Family of Personal Computers Maintenance and - Page 38
Diagnostic Error Codes, Table 3-4, Processor Test Error Codes
View all Compaq 1592DMT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3.6 Diagnostic Error Codes Diagnostic error codes occur if the system recognizes a problem while running the Compaq Diagnostic program. These error codes help identify possibly defective subassemblies. Tables 3-4 through 3-14 list possible error codes, a description of the error condition, and the action required to resolve the error condition. IMPORTANT: Retest the system after completing each step. If the problem has been resolved, do not proceed with the remaining steps. For assistance in the removal and replacement of a particular subassembly, see Chapter 7, "Removal and Replacement Procedures." For removal and replacement procedures for the convenience base, see Chapter 8. Error Code 101-xx 103-xx 103-xx 104-xx 105-xx 106-xx 107-xx 108-xx 109-xx 110-xx 113-xx 114-01 Table 3-4 Processor Test Error Codes Description CPU test failed Coprocessor or Weitek Error DMA page registers test failed Interrupt controller master test failed Port 61 error Keyboard controller self-test failed CMOS RAM test failed CMOS interrupt test failed CMOS clock test failed Programmable timer load data test failed Protected mode test failed Speaker test failed Recommended Action Replace the processor board and retest. Replace the system board and retest. 1. Check system configuration. 2. Verify cable connections to speaker. 3. Replace the system board and retest. Troubleshooting 3-11