Compaq 1592DMT Compaq Armada 1500 Family of Personal Computers Maintenance and - Page 84

6.2 Service Considerations Listed below are some considerations to keep in mind during the disassembly and assembly of the computer. Tool Requirements s Magnetic Torx T-8 screwdriver s Flat-bladed screwdriver (optional) n Tool kit, Compaq part number 100767-001 (includes case utility tool, connector removal tool, and loop back plugs) s 7-mm socket wrench s 5-mm socket wrench/screw driver s Preloaded application diskettes IMPORTANT: To reassemble the computer, set the Torx T-8 screwdriver to 3-inch lbs. Cables and Connectors Apply only the tension required to seat or unseat the cables during insertion or removal from connectors. Handle cables by the connector or pull tabs whenever possible. In all cases, avoid bending, twisting, or tearing the cables, and ensure that cables are placed in such a way that they cannot be caught or snagged by parts being removed or replaced. CAUTION: When servicing these computers, ensure that cables are placed in their proper location during the reassembly process. Improper cable placement can cause severe damage to the unit. 6.3 Serial Number The computer serial numbers should be provided to Compaq whenever requesting information or ordering spare parts. The serial number is located on the rear of the CPU. 6-6 Removal and Replacement Preliminaries