Compaq 1592DMT Compaq Armada 1500 Family of Personal Computers Maintenance and - Page 135
System Board, Remove the I/O fixture connector
View all Compaq 1592DMT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
7.19 System Board To remove the system board, complete the following procedures: 1. Disconnect the AC power and any external devices (Section 7.4.1). 2. Remove the battery pack (Section 7.4.3). 3. Remove the DualBay device (Section 7.4.4). 4. Remove any PC Cards (Section 7.4.5). 5. Remove the top cover assembly (Section 7.1.3). 6. Remove the I/O fixture connector (Section 7.18). 1 7. Remove the screws securing the system board to base enclosure . 2 8. Disconnect the CD-ROM cable . 3 9. Disconnect the AC power . 4 10. Remove the two screws from the rear of the computer that secure the system board to the base enclosure . Figure 7-45. Disconnecting the System Board Computer Removal and Replacement Procedures 7-51
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Computer Removal and Replacement Procedures
7-51
7.19
System Board
To remove the system board, complete the following procedures:
1.
Disconnect the AC power and any external devices (Section 7.4.1).
2.
Remove the battery pack (Section 7.4.3).
3.
Remove the DualBay device (Section 7.4.4).
4.
Remove any PC Cards (Section 7.4.5).
5.
Remove the top cover assembly (Section 7.1.3).
6.
Remove the I/O fixture connector (Section 7.18).
7.
Remove the screws securing the system board to base enclosure
.
8.
Disconnect the CD-ROM cable
.
9.
Disconnect the AC power
.
10. Remove the two screws from the rear of the computer that secure the system board to
the base enclosure
.
Figure 7-45.
Disconnecting the System Board