Compaq Presario CQ56-100 Compaq Presario CQ56 Notebook PC and HP G56 Notebook - Page 46
that secure the, Grasp the attached Mylar tab and pull it up to remove the bracket from the hard drive
View all Compaq Presario CQ56-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
5. Use the Mylar tab (2) to lift the hard drive out of the hard drive compartment. 6. Disconnect the hard drive cable from the system board (3) and remove the hard drive from the computer (4). 7. To replace the hard drive bracket, remove the four Phillips 3.0×3.5 screws (1) that secure the hard drive bracket to the hard drive. 8. Grasp the attached Mylar tab and pull it up to remove the bracket from the hard drive (2). Reverse this procedure to reassemble and install the hard drive. 38 Chapter 4 Removal and replacement procedures
5.
Use the Mylar tab
(2)
to lift the hard drive out of the hard drive compartment.
6.
Disconnect the hard drive cable from the system board
(3)
and remove the hard drive from the
computer
(4)
.
7.
To replace the hard drive bracket, remove the four Phillips 3.0×3.5 screws
(1)
that secure the
hard drive bracket to the hard drive.
8.
Grasp the attached Mylar tab and pull it up to remove the bracket from the hard drive
(2)
.
Reverse this procedure to reassemble and install the hard drive.
38
Chapter 4
Removal and replacement procedures