Compaq Presario CQ56-100 Compaq Presario CQ56 Notebook PC and HP G56 Notebook - Page 79
Fan/heat sink assembly, Optical drive see
View all Compaq Presario CQ56-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Fan/heat sink assembly Description Spare part number Fan/heat sink assembly (includes replacement thermal material) for use with UMA systems (AMD) 630722-001 Fan/heat sink assembly (includes replacement thermal material) for use with UMA systems (Intel) 606573-001 Before removing the fan/heat sink assembly: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 36) b. Hard drive (see Hard drive on page 37) c. WLAN module (see WLAN module on page 42) d. Memory module (see Memory module on page 44) e. Optical drive (see Optical drive on page 39) f. Keyboard (see Keyboard on page 46) g. Top cover (see Top cover on page 49) h. Display assembly (see Display assembly on page 59) i. System board (see System board on page 66) Remove the fan/heat sink assembly (fan/heat sink appearance might vary): NOTE: Steps 1 through 4 apply only to computer models equipped with the AMD processor. 1. Position the system board right-side up, with the front toward you. Component replacement procedures 71