Compaq Presario CQ56-100 Compaq Presario CQ56 Notebook PC and HP G56 Notebook - Page 68

CAUTION, that secure the display assembly to

Get Compaq Presario CQ56-100 - Notebook PC PDF manuals and user guides View all Compaq Presario CQ56-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

4. Pull the antenna cables through the opening in the top cover (3) and disengage the cables from the clip in the routing channel leading to the display hinge (4). 5. Disconnect the webcam cable (5) from the system board and release it from the clips that attach it to the system board. CAUTION: Support the display assembly when removing the display screws in the following steps. Failure to support the display assembly can result in damage to the assembly and other components. 6. Remove the four black Phillips 2.5×6.5 screws (1) that secure the display assembly to the computer. 7. Lift the display panel (2) straight up to remove it. Reverse this procedure to install the display assembly. 60 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
4.
Pull the antenna cables through the opening in the top cover
(3)
and disengage the cables from
the clip in the routing channel leading to the display hinge
(4)
.
5.
Disconnect the webcam cable
(5)
from the system board and release it from the clips that attach
it to the system board.
CAUTION:
Support the display assembly when removing the display screws in the following
steps. Failure to support the display assembly can result in damage to the assembly and other
components.
6.
Remove the four black Phillips 2.5×6.5 screws
(1)
that secure the display assembly to the
computer.
7.
Lift the display panel
(2)
straight up to remove it.
Reverse this procedure to install the display assembly.
60
Chapter 4
Removal and replacement procedures