Compaq Presario CQ56-100 Compaq Presario CQ56 Notebook PC and HP G56 Notebook - Page 63
TouchPad button board, Remove the TouchPad button board
View all Compaq Presario CQ56-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
TouchPad button board Description TouchPad button board (with cable) Spare part number 595203-001 Before removing the TouchPad button board: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 36). b. Hard drive (see Hard drive on page 37) c. WLAN module (see WLAN module on page 42) d. Keyboard (see Keyboard on page 46) e. Top cover (see Top cover on page 49) Remove the TouchPad button board: 1. Position the top cover upside down, with the front toward you. 2. Remove the two Phillips 2.5×3.0 screws (1) that secure the TouchPad board to the top cover. 3. Lift up and remove the TouchPad button board (2) from the TouchPad bracket. Reverse this procedure to install the TouchPad button board. Component replacement procedures 55