Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 38
Removal and replacement procedures, Preliminary replacement requirements, Tools required - disassembly
View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures. NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away from the work area to prevent damage. Plastic parts Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. 30 Chapter 4 Removal and replacement procedures