Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 61
disconnect the keyboard cable, to which the keyboard cable is attached,
View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5. Lift the rear edge of the keyboard (1) until it rests at an angle. 6. Release the keyboard (2) by sliding it toward the display until the tabs on the keyboard front edge disengage from the top cover. 7. Swing the keyboard (3) up and forward until it rests upside down on the palm rest. 8. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board. 9. Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 53
5
.
Lift the rear edge of the keyboard
(1)
until it rests at an angle.
6
.
Release the keyboard
(2)
by sliding it toward the display until the tabs on the keyboard front edge
disengage from the top cover.
7
.
Swing the keyboard
(3)
up and forward until it rests upside down on the palm rest.
8
.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard cable is attached, and
disconnect the keyboard cable
(2)
from the system board.
9
.
Remove the keyboard.
Reverse this procedure to install the keyboard.
Component replacement procedures
53