Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 50
Memory module, Lift the left side of the cover
View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Memory module Description 1024-MB (PC2-5300, 667-MHz, DDR2) 512-MB (PC2-5300, 667-MHz, DDR2) Spare part number 461949-001 461948-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove the memory module: 1. Position the computer with the front toward you. 2. Loosen the three Phillips PM2.5×6.0 captive screws (1) that secure the memory/WLAN module compartment cover to the computer. 3. Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The memory/ WLAN module compartment cover is included in the Plastics Kit, spare part number 442891-001. 4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 42 Chapter 4 Removal and replacement procedures