Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 78
base enclosure., Remove the USB/power connector board
View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Remove the USB/power connector board: 1. Remove the USB/power connector board cable from the clips (1) built into the base enclosure 2. Remove the two Phillips PM2.5×5.0 screws (2) that secure the USB/power connector board to the base enclosure. 3. Remove the USB/power connector board (3). Reverse this procedure to install the USB/power connector board. 70 Chapter 4 Removal and replacement procedures
Remove the USB/power connector board:
1
.
Remove the USB/power connector board cable from the clips
(1)
built into the base enclosure
2
.
Remove the two Phillips PM2.5×5.0 screws
(2)
that secure the USB/power connector board to the
base enclosure.
3
.
Remove the USB/power connector board
(3)
.
Reverse this procedure to install the USB/power connector board.
70
Chapter
4
Removal and replacement procedures