Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 72
from the system board., and the two Phillips PM2.5×5.0 screws
View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3. Remove the following: (1) Three Phillips PM2.5×4.0 screws in the optical drive bay (2) Six Phillips PM2.5×5.0 screws in the battery bay (3) Two Hex HM5.0×9.0 standoffs in the memory/WLAN module compartment 4. Turn the computer right-side up, with the front toward you. 5. Disconnect the TouchPad cable (1) from the system board. 6. Remove the two Phillips PM2.5×8.0 screws (2) and the two Phillips PM2.5×5.0 screws (3) that secure the top cover to the computer. 64 Chapter 4 Removal and replacement procedures
3
.
Remove the following:
(1)
Three Phillips PM2.5×4.0 screws in the optical drive bay
(2)
Six Phillips PM2.5×5.0 screws in the battery bay
(3)
Two Hex HM5.0×9.0 standoffs in the memory/WLAN module compartment
4
.
Turn the computer right-side up, with the front toward you.
5
.
Disconnect the TouchPad cable
(1)
from the system board.
6
.
Remove the two Phillips PM2.5×8.0 screws
(2)
and the two Phillips PM2.5×5.0 screws
(3)
that
secure the top cover to the computer.
64
Chapter
4
Removal and replacement procedures