Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 77
USB/power connector board
View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3. Remove the audio board (3). Reverse this procedure to install the audio board. USB/power connector board Description USB/power connector board Spare part number 447444-001 Before removing the USB/power connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 40) b. Optical drive (see Optical drive on page 48) c. Switch cover (see Switch cover on page 50) d. Keyboard (see Keyboard on page 52) e. Display assembly (see Display assembly on page 56) f. Top cover (see Top cover on page 63) g. System board (see System board on page 65) Component replacement procedures 69