Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 58

Switch cover, that secure

Get Compaq Presario F700 - Notebook PC PDF manuals and user guides View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Switch cover Description Switch cover (includes an LED board and LED board cable) Spare part number 442889-001 Before removing the switch cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove the switch cover: 1. Position the computer with the front toward you. 2. Remove the two Phillips PM2.5×10.0 screws (1) and the Phillips PM2.5×5.0 screw (2) that secure the switch cover to the computer. 3. Turn the computer right-side up, with the front toward you. 4. Open the computer as far as possible. 5. Lift the left and right sides of the switch cover (1) until it detaches from the computer. 50 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
Switch cover
Description
Spare part number
Switch cover (includes an LED board and LED board cable)
442889-001
Before removing the switch cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery
on page
37
).
Remove the switch cover:
1
.
Position the computer with the front toward you.
2
.
Remove the two Phillips PM2.5×10.0 screws
(1)
and the Phillips PM2.5×5.0 screw
(2)
that secure
the switch cover to the computer.
3
.
Turn the computer right-side up, with the front toward you.
4
.
Open the computer as far as possible.
5
.
Lift the left and right sides of the switch cover
(1)
until it detaches from the computer.
50
Chapter
4
Removal and replacement procedures