Compaq Presario F700 HP G6000 Notebook PC and Compaq Presario F700 Notebook PC - Page 73

System board, Hard drive see

Get Compaq Presario F700 - Notebook PC PDF manuals and user guides View all Compaq Presario F700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

7. Lift the rear edge of the top cover (1) and swing it (2) up and forward until it rests at an angle. 8. Remove the top cover Reverse this procedure to install the top cover. System board NOTE: All system board spare part kits include replacement thermal material. Description System board with ExpressCard assembly System board without ExpressCard assembly Spare part number 461861-001 461860-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 40) b. Optical drive (see Optical drive on page 48) c. Switch cover (see Switch cover on page 50) d. Keyboard (see Keyboard on page 52) e. Display assembly (see Display assembly on page 56) f. Top cover (see Top cover on page 63) Component replacement procedures 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
7
.
Lift the rear edge of the top cover
(1)
and swing it
(2)
up and forward until it rests at an angle.
8
.
Remove the top cover
Reverse this procedure to install the top cover.
System board
NOTE:
All system board spare part kits include replacement thermal material.
Description
Spare part number
System board with ExpressCard assembly
461861-001
System board without ExpressCard assembly
461860-001
Before removing the system board, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery
on page
37
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive
on page
40
)
b
.
Optical drive (see
Optical drive
on page
48
)
c
.
Switch cover (see
Switch cover
on page
50
)
d
.
Keyboard (see
Keyboard
on page
52
)
e
.
Display assembly (see
Display assembly
on page
56
)
f
.
Top cover (see
Top cover
on page
63
)
Component replacement procedures
65