Craftsman 21221 Operation Manual - Page 40
Fig. PP, AUXILIARY, Fig. QQ, Fig. RR
View all Craftsman 21221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Fig. PP \ / / AUXILIARY WOOD FENCE (FIG. QQ) When making multiple or repetitive cuts that result in cut-off pieces of one inch or less, it is possible for the saw blade to catch the cut-off piece and throw it out of the saw or into the blade guard and housing, possibly causing damage or injury. To minimize this an auxiliary wood fence can be mounted to your saw. Holes are provided in the saw fence to attach an auxiliary wood fence (this provides additional depth of cut). This fence should be constructed of straight auxiliary wood approximately 3/4 in. thick by 1-1/2 in. high by 22 in. long. Attach the wood fence securely and make a full depth cut to make a blade slot. Check for interference between the wood fence and the lower blade guard. Adjust if necessary. CHANGING THE BELT (FIG. RR, SS) • Unplug your saw. 1. Loosen the bolts (1) and remove the belt cover. 2. Turn the screw (2) anti-clockwise with a hex wrench to move the motor to forward. 3. Remove and replace the belt. 4. Turn the screw (2) clockwise with a hex wrench to move the motor to rearward. Do not over tighten. 5. Replace the belt cover and tighten the bolts. Fig. RR Fig. SS Fig. QQ Blade slot 40