D-Link DCS-1000W User Manual - Page 13
Software Installation - d link software
View all D-Link DCS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Software Installation This section describes the Software installation procedure of the DCS-1000W for Web Configuration and the IPView application. Web Configuration • DCS-1000W must be configured through its built-in Web-based Configuration. From the web browser, enter the default IP address (192.168.0.20) to access the Welcome screen of the DCS-1000W. To configure your DCS-1000W type "http://192.168.0.20" in the address box of your favorite Web Browser. The number is the default IP address of your DCS-1000W. Press Enter. Note: The PC's IP address must correspond with the DCS-1000W's IP address in the same segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the two devices to communicate. For instructions on how to do this, please access instructions for installing any of the D-Link Broadband Gateway products from support.dlink.com/products. The DI-713 or DI-714 are good products to use as an example as their Quick Install Guides are the most up-to-date. 12